Language
Heat Resistant Tissue Tape is widely used
Release time：
2023-08-03
Heat Resistant Tissue Tape is the adhesive tape used in high temperature working environment. It is mainly used in the electronics industry, and its temperature resistance is usually between 120 and 260 degrees. It is often used in spray painting, baking varnish leather processing, painting masking and fixing in the process of electronic parts, printed circuit boards and high-temperature treatment masking.
The overall heat conduction effect of the product, so how to check the quality of Heat Resistant Tissue Tape? Heat Resistant Tissue Tape has good softness, compressibility, conformability, and strong viscosity. It is mainly made of acrylic polymer filled with heat-conducting ceramic powder and compounded with organic silica gel. It can fill uneven surfaces and can be tightly and firmly adhered to Fit the heat source device and the heat sink to conduct the heat quickly.
The quality inspection method of Heat Resistant Tissue Tape is as follows:
Check whether the Heat Resistant Tissue Tape has burrs. The thermally conductive double-sided adhesive has a smooth edge and no damage is the basis for ensuring the quality of the Heat Resistant Tissue Tape.
Check whether the cut end of the Heat Resistant Tissue Tape is straight and whether the rewinding is tight or not. If the cut ends of Heat Resistant Tissue Tape are uneven, it will not only affect the registration during processing, but also cause waste discharge difficulties due to changes in the die-cutting position. Inconsistent tension during rewinding will cause changes in tension, and uneven tension will also cause cause quality problems.
Check whether there are cracks on the Heat Resistant Tissue Tape. When the Heat Resistant Tissue Tape is slitting, if the slitting knife is not adjusted properly or the blade is not sharp enough, cracks will appear on the top paper or bottom paper of the Heat Resistant Tissue Tape, and the cracks will be pulled The fibers that go out will be stuck by the adhesive again, thus affecting the actual use.
Check whether the edge of the Heat Resistant Tissue Tape is sticking, and whether the backing paper is leak-coated with silicon. If there is such a phenomenon, it will cause the surface paper to break during the waste discharge during the processing process, and normal production cannot be performed. It is also necessary to test whether the thermal conductivity, thickness, insulation capacity and other properties of the Heat Resistant Tissue Tape meet the requirements.
Choosing Heat Resistant Tissue Tape with high performance can bring better thermal conductivity to the product. In the process of selecting Heat Resistant Tissue Tape, you should customize it according to your own needs. Don’t cause waste because of the mentality that low price, cheap or expensive is good.
News
We always adhere to the "multi variety, personalized,
high-grade,excellent quality" as the service advantages,to provide customers with satisfactory adhesive products.
Tel: 86-760-22281809
Fax: 86-760-22281801
Email: jefferyfung@chicuntapes.com
mobile: 86-18923345411
Contact：Mr.Feng